Drying and cooling function of shrinking machine

Shrinker drying and cooling function:

1. Drying

The main structure is: special wool blanket, large dryer, small dryer, large dryer drive motor, blanket tension roller, blanket adjustment roller. Its function is: the function of the wool blanket and the large drying cylinder is to dry the fabric pre-shrunk by the rubber blanket under the condition of almost no tension, so that the shrinkage of the fabric can be preserved, and the function of the small drying cylinder is to dry the sheep. Blanket; the function of the tension roller is to make the wool blanket have a certain tension; the function of the adjusting roller is to control the wool blanket from deviation; the function of the transmission motor is to provide power for the department. At the same time, it can be adjusted to produce overfeeding with the rubber blanket.

2. Cooling

The main structure is: two water cooling cylinders controlled by solenoid valves. Its function is to cool the cloth surface so that the temperature of the falling cloth will not be too high and cause the cloth surface to pile up wrinkles.

Five, drop cloth

1. Storage device

The main structure is: cloth feeding roller, J-shaped cloth stacking groove, tension adjustment device, edge suction device. Its function is: to store the cloth to ensure the smooth conversion of processing varieties without stopping the machine. At the same time, it can measure the measuring point after the cloth shrinkage rate is manually measured for the cloth package type. The function of the tension adjustment device is mainly to adjust the tension of the cloth in the case of cloth storage, so that the cloth can run smoothly, and the edge suction device makes the cloth not go out of the cloth storage device.

2. Vehicle drop cloth

The main structure is: the transmission roller driven by the transmission motor, the cloth drop pressure roller, and the left and right. Its function is: the transmission roller driven by the transmission motor makes the cloth run; the cloth falling pressure roller can help the cloth fall to reduce the tension in the warp direction so that the cloth falls smoothly;

3. Cloth drop in roll

The main structure is: the transmission roller driven by the transmission motor, the selvedge constant motion adjustment roller, and the package rack. Its function is: the driving roller driven by the transmission motor makes the cloth run; the cloth falling will swing to the left and right within a certain range when the selvedge constant motion adjustment roller passes through, effectively avoiding the situation that the middle of the falling cloth of the package is tight and the two sides are loose.

https://www.hans-machinery.com/