How to operate the open width pre-shrinking machine

The open width shrinking machine is a device used to shrink packaging film, usually used in the food, beverage, daily necessities and other industries. Operating the open width shrinking machine requires certain skills and precautions. The following are the general operating steps:

1.Preparation: Make sure the equipment is powered on, check whether the equipment is in normal working condition, and check whether the film roll is installed correctly.

2.Setting parameters: Adjust the parameters of the shrinking machine as needed, such as temperature, speed, etc. These parameters will affect the shrinking effect of the film.

3.Start the machine: Press the start button to start the shrinking machine. Make sure the machine is running normally without any abnormal sounds or vibrations.

4.Feeding packaging items: Place the items to be packaged on the conveyor belt and let them enter the film area of the shrink machine.

5.Film shrinking: The film is heated in the preheating area and then tightly wrapped around the item in the shrinking area. Make sure the film is completely wrapped without holes or wrinkles.

6.Cutting and sealing: Once the film packaging is completed, the shrink machine will automatically cut and seal to ensure that the packaging bag is sealed.

7. Take out the packaged items: Wait for the shrink machine to complete the entire packaging process, and then take out the packaged items.

8. Cleaning and maintenance: After use, clean the shrink machine in time to ensure that the equipment remains in good condition and prolong its service life.