Reasons for the cloth guide roller of the weft straightening machine

The fabric guide roller is used for the open width and fabric guide of the photoelectric weft straightening machine. Sometimes it is found that the exported fabric will be inclined and uneven, etc., which are all related to the fabric guide roller. The reason and solution for the failure of the fabric guide roller Methods:
1. The fabric is inclined, and the "seize" situation occurs when the machine is advancing.
This is mainly caused by the non-parallel cloth guide rollers. The equipment operator can solve the problem by adjusting the parallelism of the cloth guide rollers.
2. The cloth roll is not neat
. The uneven cloth roll is caused by the non-parallel between the cloth roll and the guide roll. Therefore, adjusting the parallelism of the roll roll and the guide roll can eliminate the problem of uneven roll.
3. The reason for this problem due to the heavy cloth guide and roll cloth
may be that the cloth guide roller of the machine has dust, lint and oil stains, or the transmission parts are not installed properly, as long as we install the transmission parts of the machine correctly and clean them regularly Oil stains and cloth wool on the surface of the cloth guide roller are enough.
The linear speed of the guide roller should not exceed the allowable cutting speed of the cutting tool to avoid damage to the tool.

https://www.hans-machinery.com