Safety Operation Procedures For Opener
Apr 24, 2022
The opening machine uses the olecranon to open the cylindrical cloth, which is suitable for the opening of knitted embryonic cloth. The amplitude of the olecranon is adjustable to adapt to different diameter cloth. After opening, the cloth shall be checked by the upper and lower light boxes and then rolled into bundles. The opening and cloth inspection shall be completed at one time.
The use of the opener requires safe operation in order to be safe:
1. Turn on the "power button" and "full machine start" to make the "opening" and "centering" in the automatic key position.
2. Carefully check whether the cloth dropping bucket is clean, check the process flow card, and start the machine for operation after confirmation. In the process of opening, we should often
Check whether the conveying device is flexible and whether the centering device is sensitive. If the automatic device fails, it should be changed to manual control temporarily. In case of deviation correction failure, cloth knotting, etc., press the "emergency stop" key and start the machine after finishing.
3. The cloth joint shall be tied firmly, and the quality of the falling cloth surface shall be checked frequently. If there are quality defects, the workshop director on duty shall be informed in time to arrange the return flow, so as not to flow into the next process.
4. Clean the winding of centering machine and cloth guide roller in time to keep the machine clean and tidy.
5. After the opening of each cylinder, fill in the process flow card.
6. When cleaning and sanitation during shift handover, especially when cleaning the upper part of the opener, pay attention to the firm balance of the ladder when going up and down the ladder, hold the ladder firmly with your hands, and hold the ladder firmly with veterinary drugs when cleaning the upper part, beware of slipping or stepping empty, so as to avoid safety accidents.
7. When the equipment stops production, turn off the power supply and pay attention to the safety of power consumption.
8. Slippers are not allowed to wear at work, and the buttons of clothes should be buttoned to prevent accidents.
