Attention when installing the photoelectric weft straightening machine

1. The middle of the weft straightening machine should coincide with the middle line of the assembly line, and the error should not be greater than 5mm.

2. The cloth guide rollers of the weft straightening machine are parallel to each other. When installing, it should be ensured that it is parallel to the cloth guide rollers of the front and rear stages of the machine, otherwise the effect will be poor.

3. Take a cloth guide roller at the top as the benchmark, and align it to the level.

4. The cloth is fed on the side of the bending stick of the weft straightening machine, and the cloth is discharged from the side of the oblique stick.

5. After the above two items are completed, use the anchor screws to fix the weft straightening machine.

https://www.hans-machinery.com/